QBase®
Metal, Shake & Slate Mount
The QBase® Metal, Shake & Slate Mount is a multi-purpose base-and-post style solar mounting system offering superior strength and waterproofing for metal shingle, shake, and slate shingle roofs.
The oversized 18×18-inch flashing accommodates the large exposure of various types of roofing. Available in aluminum mill finish.
For Metal Shingle Roofs
The QBase® Metal, Shake & Slate Mount is a strong and cost-effective solution for installing solar on a variety of metal shingle roof types. The base-and-post mounts work with all standard rail-based racking systems and are fully engineered to meet code requirements and industry best practices.
- Download instructions for installing QuickMount® products on a metal shingle roofs.
For Shake Roofs
The QBase® Metal, Shake & Slate Mount
For Slate Roofs
The QBase® Metal, Shake & Slate Mount is the ideal solution for both new and existing slate roofs. First flashed mount designed specifically for slate roofs and will not compromise the integrity of the slate.
Features
- Flashing holds firm against wind-driven rain
- All exposed hardware is 18-8 stainless steel
- Meets or exceeds roofing industry best practices
- 3031 lbs. average ultimate pullout (Douglas fir)
- 1972 lbs. average ultimate shear
- Cone flashing is made of aluminum with no welds or seams to rust or rot
Resources
- Installation Guide – QBase Shake & Slate
- Installing on Metal Shingle Roofs
- Engineering Report
- CAD Blocks (DWG, PDF)
Certification Letters
Rail Compatibility
| Ninja Column 1 | Ninja Column 2 |
|---|---|
| Included in kit | Cast aluminum QBase Aluminum post, 1.25″ x 3.25″ EPDM post collar/counter flash EPDM-bonded stainless steel washer, 5/16″ x 1.25″ 18″ x 18″ spun aluminum cone flashing Two zinc-coated steel lag bolts, 5/16″ x 3″ Stainless steel machine bolt, 5/16″ x 1″ Stainless steel fender washer, 5/16″ x 1″ Stainless steel split lock washer, 5/16″ Grade-8 machine bolt, 5/16″ x ¾” |
| Flashing size | 18″ x 18″ |
| Pullout/shear | 3031 lbs. average ultimate pullout (Douglas fir); 803 lbs. average ultimate shear |
| Tools needed for shake shingle roofs: | Tape measure Roofing bar Chalk line Stud finder Caulking gun and sealant compatible with roofing materials Drill with 7/32″ bit Drill or impact gun with ½” deep socket |
| Tools needed for slate shingle roofs: | Tape measure Slate roofing bar Chalk line Stud finder Caulking gun and sealant compatible with roofing material Drill 4″ diameter diamond embedded hole saw Masonry drill bit matching size of hole saw pilot drill bit Grinder with cutoff wheel Hammer 7/32″ high-speed drill bit Impact gun with ½” deep socket |
| Applicable roof types | Metal shingle roofs, wood shake shingle roofs or slate shingle roofs. Check out our Solar Roofing Best Practices – Shake, Slate, & Metal Shingle Roofs webinar for more info. |
| Available finishes | Aluminum mill Bronze anodized |
Installing the QMNS on Metal Shingle Roofs
Full Install: QBase Metal, Shake & Slate Mount on Shake Roof
UL 2703 Certification
All IronRidge® Systems have been listed to UL 2703, the standard for evaluating solar mounting systems. This ensures they maintain strong electrical and mechanical connections over an extended period of time in extreme outdoor environments.
25-Year Warranty
IronRidge® products come with a 25-year warranty, guaranteeing they will be free of defects in materials and manufacturing which materially impair the use of the products for the purposes for which they were designed.
